Poultry Feed Pellet Machine ABKE-020

LIVI poultry feed pellet machine ABKE-020 combines grinding, mixing and pelleting in a feed-production workflow with formula customization. The suitable configuration depends on the required output, recipe, raw-material properties, moisture and available utilities. The throughput shown below is a LIVI knowledge-base reference and must be verified for the selected model and real production conditions.

Quick facts

Item	Knowledge-base reference	What must be confirmed
Product code	ABKE-020	Selected model and complete line scope
Reference throughput	800–3,500 kg/h	Model, recipe, moisture, raw material, operating conditions and utilities
Documented stages	Grinding, mixing and pelleting	Included machines, transfer interfaces, controls and production boundary
Formula	Formula customization is supported	Approved recipe, ingredient characteristics and process settings
Final scope	Project-specific	Storage, conveying, downstream handling, civil works and utility interfaces

Documented process flow

Grinding: the knowledge base identifies grinding as a process stage. The proposed grinder, feedstock range and interface to the next stage must be listed for the selected configuration.
Mixing: ground ingredients move into the documented mixing stage. The accepted recipe, batch or continuous arrangement, and inclusion of dosing or transfer equipment must be defined in the proposal.
Pelleting: the mixed feed enters the documented pelleting stage. The applicable model, settings and output reference depend on the recipe, moisture and raw-material characteristics.
Downstream boundary: the fact ledger does not specify cooling, screening, packing or storage equipment. If the project requires any downstream stage, it should appear explicitly in the quoted equipment list rather than being assumed.

How to interpret the throughput range

The 800–3,500 kg/h figure is a LIVI knowledge-base configuration reference. It is not one guaranteed speed for every recipe or raw material. Final throughput must be matched to the selected model and confirmed against the agreed ingredient characteristics, moisture, formula, operating conditions and utilities. A useful proposal identifies both the design basis and the test conditions instead of quoting the highest number alone.

Inputs needed before quotation

Target production rate and operating hours per day
Ingredient list, expected raw-material form and relevant material condition
Expected moisture range and the formula or formulas to be reviewed
Required pellet format and the product changeover plan
Desired boundary of supply: grinding, mixing, pelleting and any requested upstream or downstream equipment
Material receiving, storage, internal transfer and finished-product handling plan
Available voltage, phase, frequency and other utilities required by the proposed configuration
Building dimensions, equipment access, floor/loading information and dust-management requirements
Required controls, spare parts, documentation, installation guidance and training
Applicable local electrical, safety, environmental and feed-production requirements
Proposed raw material, run duration and measurement method for acceptance

Questions to settle in the proposal

Which model and process arrangement support the quoted throughput reference?
Which grinding, mixing and pelleting components are included?
What raw-material and moisture assumptions are used for selection?
Which conveying, storage and downstream stages are included or excluded?
Which site utilities and civil works must the buyer provide?
How will throughput be measured with the agreed recipe and operating conditions?

Frequently asked questions

Will every ABKE-020 configuration produce 3,500 kg/h?

No. The LIVI knowledge base records 800–3,500 kg/h as a model-dependent reference range. Actual applicable throughput must be confirmed for the selected model, recipe, moisture, raw material, utilities and operating conditions.

Are grinding, mixing and pelleting all documented?

Yes. These three stages are supported by the fact ledger. The exact machines, transfer interfaces, controls and line boundary are not defined by the summary record and must be listed in the quotation.

Can the formula be customized?

Formula customization is documented. The proposed recipe, ingredient properties, moisture and process settings still require technical review before a model and throughput basis are confirmed.

Are cooling, screening and packing included?

The fact ledger does not establish those stages as included. Request a complete equipment list that marks every upstream and downstream item as included, optional or excluded.

Related equipment

Request a feed-production configuration review

Send the target output, ingredient information, moisture, formula, operating schedule, building constraints and available utilities. LIVI can use these inputs to prepare a model-specific proposal for review.

SEND PRODUCTION REQUIREMENTS